Dynojet QuickShifter Pressure/Tension Sensor - PCV

Home > Performance Parts > Quick Shifters > Dynojet >

Dynojet QuickShifter Pressure/Tension Sensor - PCV - Push/Pull (4-130)

Retail Price: $292.21

Our Price: $270.99

You save $21.22!

Earns 271 58cycle MyRewards Points

Availability: In Stock

58cycle Code: QUICK SHIFTER PUSH V

Description

Dynojet Quick Shifter Pressure/Tension Sensor - Push Type

This unit is used if the shift rod pushes the transmission-mounted shifter yoke to upshift (given your desired shifting configuration (standard or GP)).

Normally during "up shifting" you must roll off of the throttle and pull in the clutch in order to engage the next higher gear. In racing (both drag and road race), split seconds count. Rolling off the throttle, even slightly, slows your times and can be the difference between winning and losing.

The Dynojet Quick Shifter (DQS) allows full throttle, clutch less shifting. This is done by momentarily cutting the fuel and or ignition, which unloads the transmission. During this time, the rider can shift up to the next gear without rolling off the throttle or using the clutch.

The PCV incorporates all of the Quick Shifter functionality in with the main fuel controller and is fully programmable. No cutting or splicing of your bike's wiring harness is necessary.

The amount of "kill time" is adjustable by the user via the provided software. The user can also set a minimum rpm for the system to function. This keeps the system from activating at too low of an rpm, such as low speed road riding.

Note: Certain bikes require an ignition module for Quick Shifter functionality.

Shift rods required for use.

~-~-~-~-~

Dynojet QuickShifter Pressure/Tension Sensor - PCV - Push